PS
PROPORTIONAL PNEUMATIC VALVE
proportional pneumatic valve with position control by displacement transducer are available from DN15 to DN65.
BD
MANUAL AND PNEUMATIC BLOWDOWN VALVE
The blowdown valve open manually by the action of the hand lever towards the direction of arrow B, the valve close automatically is the lever is led loose.
IN
INSTRUMENTS
I/P electropneumatic converter is used to supply pressure to diaphragm regulating valves.
LH
ELECTRIC ACTUATOR TYPE “LH”
Microprocessor controlled with automatic self-calibration on start up, LED indication of actuator status.
LS-RS
ELECTRIC ACTUATOR TYPE “LS” - “RS”
High protection class ATEX for use in zone 1,2 (gas) and zone 21,22 (dust), Universal supply unit from 24 to 240 V – AC/DC.
M9-2
TWO-WAY PNEUMATIC CONTROL VALVE
“M9-2” control valves have been designed to meet the most specific fluid adjustment requirements in a plant.
M9-3
THREE-WAY PNEUMATIC CONTROL VALVE
“M9-3” control valves have been designed to meet the most specific fluid adjustment requirements in a plant.
SER
PNEUMATIC SERVOCONTROL
The pneumatic servocontrols series “SERM9” and series “SERM8” transform the pneumatic signal into a linear movement of valve stem.
M6-3
THREE-WAY PNEUMATIC AND ELECTRICAL VALVE
Designed to obtain an economic and compact valve with linear plug, nodular cast iron EN-GJS-400-18-LT (GGG40.3) body; available with pneumatic actuator.
FPMD-SQMD
TWO-WAY PNEUMATIC CONTROL VALVE
“FPMD” control valves are free flow valves (45°) with a modulating servocontrol available in the different driving signals nominal 3÷15, 6÷18, 6÷30 psi.
M8
TWO-WAY PNEUMATIC CONTROL VALVE
The “M8” series control valves are designed to satisfy control needs using a functional and cheap modulating valve. This valve is ideal for controlling fluids in a plant.
RI-VS
DIRECT ACTING VALVES
Pressure reducing valves “RI” series are designed to control pressure in the pipe lines for water, gas or steam; the pressure reducer series “RI” controls the pressure of the fluid, maintaining it at the set nominal value.